10瓦特无线电衰减器标签
10 Watt RF Attenuator Tag
2024-02-18 13:12:35
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I have a bunch of the Chinese 10 Watt RF attenuators with SMA, N, and BNC connectors. As they come from the factory they just have a sticker for the value on the heat sink fins. After a short while that sticker comes off. So I created these that snap over one end, to show the Value in DB of each attenuator. I printed these in TPU, and it needs to be flexible as it needs to be stretched over the end of the heatsink.
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3 Pro
- Rafts:No
- Supports:No
- Resolution:.2
- Filament brand:
PriLine
- Filament color:
Blue
- Filament material:
TPU
- Notes:
Print with lettering down on the build plate
License
CC BY-NC-SA
10 Watt RF Attenuator Tag
by digid is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
猜你喜欢
联系我们
邮箱: 289047960@qq.com
热门推荐
-
EEZYbotARM MK2智能机器人3D模型2023-03-26 -
CABLE LABEL2023-03-31 -
Skyrim 120mm风扇护罩3D模型2023-05-10 -
OR灯罩3D模型展示2024-01-06 -
3D模型：肩部按钮模块V0.1B2024-03-25
最热下载
-
人耳道2023-03-26 -
钥匙解码器（用于房门钥匙复制）2023-03-26 -
适用于ebyte E104-BT5040U USB适配器的外壳2024-04-28 -
GLOCK 17型手枪2024-05-03 -
原神优菈2025-06-27
最新模型
-
丰田22RE发动机Starer电机2025-08-08 -
用于HGX Lite的MBOT3D MK2混音版2025-07-18 -
鞋带锁2025-07-17 -
KALYRA PRIME - 一姐 适合桌面游戏和收藏家的科幻女英雄。2025-07-15 -
真实玩偶 / 镶有凸圆形玻璃参数的眼睛2025-07-15