魔幻骰子盒：D&D专属装饰盒

Dice box for D&D

2024-03-12 09:26:37

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

D&D dice & figurine holder I made from scratch using TinkerCAD. I had a few 'Tosnail 2 oz Clear Plastic Square Dessert Cups' laying around and wanted to make a dice holder that would accommodate them. The clear plastic cups are great because I can take them out, and flip them over into my hand, thus saving the time of trying to fish them out.

The magnet pillars on each corner will fit a 5x3 mm circle magnet. I sized the holes on the top and bottom to 5.3mm diameter to allow for easy installation. On my Anet A8 the magnets fit in fine, but on my Ender 3, I had to use a 13/64 inch drill bit to bore out juuuust enough material for the magnets to fit.

Underneath the box are magnet holes so the lid doesn't have to roam free or be put away during your game.

This was my first time making anything from scratch in TinkerCAD, and I hope y'all enjoy it as much I had making it!