乐高海龟头造型

Lego Tortle Head

2024-03-12 09:27:28

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

My wife plays a Tortle Bard in D&D, and we started using minifigs for miniatures. The two-part cane topper was perfect for remixing into a minifig head. I mirrored the right-hand side of the original topper, then scaled it in tinkercad until it looked proper.

Print Settings

Printer brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.06
Infill:
20
Filament brand:
Microcenter
Filament color:
Various
Filament material:
PLA
Notes:
Printed with tree supports, no raft, brim or skirt. Takes about 50mm @ 35mm/sec printing. Used a revo change 0.25 nozzle, and printed at 220C. Fits just perfectly on the neck post of a minifig if you don't have too much squish. If you DO have squish, you might need to run a knife around the bottom of the neck to open it up just a hair.

Make yourself an army of Tortles!