旋转式刷子托盘

Rotating Brush Holder

2024-03-13 20:54:00

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A brush holder that rotates for ease of access.

What you will need in addition to the printed parts: 1x ball bearing sized 8 x 22 x 7 mm.

To assemble:

File and sand holes that the columns enter so they fit snugly. Takes about 10-15 minutes.
use light but firm taps with a small rubber hammer through step 2-5
Press the ball bearing into Platform 1.3.
Press one end of all 4 auxiliary columns into the corresponding holes on Platform 1.1
Repeat the process for Platform 1.2.
Thread the central column through the center hole in Platform 1.1 and into the matching center hole on Platform 1.2.
Press Platform 1.3 with the ball bearing inside it against the underside of Platform 1.2 to join them together.

Enjoy.

Print Settings

Printer brand:
Bambulabs
Printer:
Bambu P1S
Rafts:
No
Supports:
Yes
Infill:
15%

License

CC BY-NC-SA

Rotating Brush Holder
by Kdesigns101 is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.

旋转式刷子托盘

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

Peugeot 2008 iPhone Magsafe Holder
2023-06-19
阿克哈姆恐怖第二版盒子
2023-12-30
拒绝的手势
2024-04-19
乒乓球无气
2024-04-22
K1/K1 Max可调节摄像头支架及角度选项
2024-05-03

最热下载

Toyota 22RE发动机扩展套件
2023-03-26
二十面体骰子模型
2024-03-29
BlueSCSI v2 SPARCstation驱动器支架及密封环
2024-04-14
Magpul MOE SL-K 3D模型
2024-04-16
街用迷你四驱车轮子
2024-05-01

最新模型