Ducati 1260 Multistrada 镜头支架摄像头GPS球形支架

Ducati 1260 Multistrada Mirror Stalk Camera GPS Ball Mount

2024-03-14 10:27:53

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

There's not much useable space on the front of a Multistrada once you get a tank bag mounted, so I made up a ball mount to go on the mirror stalk. I intend to use it as a camera mount but I suppose if you don't mind killing bugs with your GPS or phone you could mount those there too.

Designed for a 1260 Multi but I think the 1200 and the 950 use the same mirror stalks?

Print Settings

Printer brand:
Creality
Printer:
K1
Rafts:
No
Supports:
Yes
Filament brand:
Your Choice
Filament color:
Your Choice
Filament material:
Your Choice
Notes:
The base works with either top piece, you only have to print one of them. For more security you can use the two piece upper - the ball ends up with a bolt running through it on that one. If you trust your printing skills you can use the one piece. The photo with all the parts shows the orientation I'd suggest printing them in.

The one piece upper mount has flat spots on the sides of the ball, use one of these to postion the part on the bed and use supports. Printing this upright will result in a weaker part due to orientation of the layer lines. The seperate ball can be printed upright because the 5mm bolt running through it prevents seperation at the layer lines.

All hardware is 5mm. I use nylocks under the clamp.

I used carbon fiber infused PETG for these but make your own choices for materials.