Saturn 3 Ultra Magnetic Vent Adapter for 4" Dryer Vent Hose/Duct

2024-03-15 07:13:36

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

抖音私信 @jobsfan

It consists of 3 parts (plus a cap) and will allow you to create a magnetic connection for a 4" dryer vent hose/duct to your Saturn 3 Ultra.

Required parts for just this print:

The parts I used for my Ventilation System include:

https://www.amazon.com/dp/B0CNVSRN2Y
https://www.amazon.com/dp/B09MVG2DT8
https://www.amazon.com/dp/B0C7Z82L7P
NOTE: the silver hose that comes with the window kit is non-standard and will NOT fit on the inline fan or 3D printed adapter. The black hose works great. I cut the black hose and used hose clamps to install the fan inline.

The original used a separate 3" to 4" adapter and 4" dryer vent hose adapter to convert the Saturn 3 Ultra's vent port to the 4" dryer vent hose.

I combined the two parts into one creating a single component that will magnetize to magnet plate bolted to the Saturn 3 Ultra.

I also converted the 6mm x 3mm magnet holes to 6mm x 2mm magnet holes.