SureFeed微芯片宠物喂食器浅托高碗

SureFeed microchip pet feeder shallow raised bowl

2024-04-15 13:18:25

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A friend of mine has a particularly picky cat that needed a raised bowl without sharp corners that “trap” food. I know what you're thinking, “classic cat”, am I right?

Anyway, I am always happy to help. There was already a design here by
The_AstroHighlander for her particular feeder, though that one had some printability issues. I modified it to raise the bottom a bit, aggressively slope the inside so that food falls to the center, and adjust the sides to that no supports are necessary to print it. This bowl fits half a cup of dry food.

If you need this very oddly specific bowl… I guess you are welcome.

You can use any print settings you'd like. I used 0.2mm layer height, and also 20% lightning infill.