可叠放厨房用氧化物杯配搅拌器

Stackable epoxi cup with spatula

2024-03-15 20:50:21

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I often use epoxy to fuse 3D-printed parts. Usually this means that I need a very small batch at a time. Each application uses up a cup and a spatula. Finding suitable mixing cups that do not tip over or are too large has been a problem. Getting hold of suitable spatulas is easier. I often use disposable chopsticks. But that requires cutting the tip to form the small flat point that is needed. Another problem is that I hate cleaning up epoxy spill caused by the spatula falling onto the table. I need somewhere safe to place the spatula after application.

The solution for me has been this design of a small, stackable cup with a small spatula attached. There is an extra area available where the spatula can be placed after use.

I print a batch of these at a time and store them together with the epoxy. This way I always have a cup available when I need one.

The FreeCAD model file is included. Use it for whatever you want.

Print Settings

Printer:
Doesn´t Matter
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.2 mm layers
Infill:
Doesn´t Matter
Filament brand:
Doesn´t Matter
Filament color:
Doesn´t Matter
Filament material:
Doesn´t Matter
Notes:
The model is optimized for 0.2 mm layer height using a standard 0.4 mm nozzle.
Even finer settings naturally works.