电动自行车 PAS 系统的轮轴 c.12 盖

Pinion c.12 cap for e-bike PAS

2024-03-16 00:23:38

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Fuse together ebike.ca 24 pole mini PAS and pinion c.12 sungear plastic cover.
No gearbox internal changes are needed. PAS gear is attached via piece of hex tool to the pinion sungear
https://www.ebikes.ca/documents/PAS_24Pole.pdf
https://pinion.eu/en/c-line/

BOM:
1) spare c.12 cap and hole drill
2) PAS and soldering iron to flip sensor on PCB
3) piece of 3 mm hex wrench

Random notes:
So far it survived one snow rich winter ( -27 C), spring and total of ~ 1000 km of happiness
Probably it won't invalidate gearbox guarantee since I can always flip original cap back
Newer e-bike ready pinions have built in torque sensors
My printer is old fart self built decade ago
I did it for my needs - so no real documentation