电动机盖套（AR15, M16, M4）空气软枪

Charging Handle Cover (AR15, M16, M4) Airsoft

2024-03-16 20:01:54

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This design was created from scratch to cover the hole a typical HPA conversion leaves on the back of your upper receiver. Sure, you can still put the original charging handle (with spring) there but... come on, we want a lightweight toy and not a fully featured replica. Some people designed somthing similiar but charge you money for it, which I do not like for such silly and easy things. It took me like three hours and two prints to get it good enough for my needs.
There is some slot where the gearbox should fit in. I was not able to check / test this because my own gearbox is cut down at the back.

The design itself should be press-fit. I used a "heavy beating device" (hammer, piece of wood, whatever fits the bill) to insert the cover for the first time. It is specifically designed for Specna Arms Edge 2.0 metal uppers from the E-series.
I don't know if it will fit any other replicas but you might give it a try. Printing time is about 30 minutes with like 3g filament.

This will be part of a stock cover (to hide the ugly ununsed part at the end of the lower receiver) which I am currently developing.
As usual I included the SketchUp file in case you want to modify anything. Please note that the surfaces are not really equal flat and straight.