GR Yaris/Corolla 动作摄像头头枕支架

GR Yaris/Corolla - Action Camera Headrest Mount

2024-03-17 17:37:49

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Revised Design:

Shaved logos and text to reduce print time
Slimmed down the main body of the mount to allow the headrest to click in. (Australian Spec at least)
Centered the Action camera mount.
Spaced the Action camera mount away from the seat some more to allow direct camera mounting instead of having to use extensions. Widened neck of spacer portion.
Sized up the captive nut space to accept GoPro acorn style nuts while still accepting M5 nuts.
Deepened the scallops that fit the GoPro mount to allow full 90 degree mounting with various action cams.
Added a center hole to the main body to reduce unneeded material. (and to pay homage to the GR Yaris/Corolla 3Cyl powerplant!).

I will be happy to make additional refinements and can see that someone wanted a tether hole. I will include one on the next release. I hadn't on this release because it is not a requirement by Motorsport Australia unless the camera mount is attached using a suction mount.

Print Settings

Printer brand:
Sovol 3D
Printer:
Sovol SV06
Rafts:
No
Supports:
Yes
Resolution:
.2mm
Infill:
30% Triangles
Filament brand:
3DFillies
Filament color:
Black
Filament material:
PLA+
Notes:
I printed with 3 walls and 30% infill which should make it pretty rigid.
I printed with a Brim just to stop any lift on the corners to ensure a slick part.