RC10电池箱
RC10 Battery Box
2024-03-18 01:44:42
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This design is a recreation of the stock battery box that was included with RC10 kits. It will fit the stock mounting holes on an RC10 chassis. Use a 4-40 tap to thread the mounting holes on top and bottom.
I also have a version of this design with the front notched out, for use with stick battery packs.
You may also want to use my top/strap. It has a modified keyhole to accommodate PLA material being less flexible than the original nylon.
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3 Pro
- Rafts:No
- Supports:No
- Resolution:.12mm
- Infill:100%
- Filament brand:
any
- Filament color:
any
- Filament material:
PLA
- Notes:
When tapping the mounting holes, clean the cuttings from the tap frequently to avoid clogging the tap and fouling the holes.
Tags
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
联系我们
邮箱: 289047960@qq.com
热门推荐
-
2023年度EDC手镯饰品2023-05-10 -
5英寸照片框支架2023-06-03 -
Gridfinity 花瓶款式容器2024-01-14 -
海洋之滴 Boargame 天文仪室2024-03-21 -
Ender-3电源下部支架2024-04-22
最热下载
-
Toyota 22RE发动机扩展套件2023-03-26 -
MK47 模组道具枪2023-03-26 -
7英寸HDMI显示器-B外壳2024-04-01 -
Arduino或5V继电器控制板固定架2024-04-02 -
Ikea 米兹顿 插嵌2024-04-20
最新模型
-
3D木托盘模型2024-05-08 -
偏移适配器 for BTT SKR 3 EZ on Ender 5 Plus2024-05-08 -
野马Mach 1雾灯支架模型2024-05-08 -
电脑风扇独立式模型2024-05-06 -
支撑结构盖板与延伸部分2024-05-06