B&W 1/10 RC爬行车专用挂钩配件

B&W Drop Tow hitch for 1/10 RC crawlers

2024-04-13 05:58:05

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I couldn't find any good tow hitches that were the right length for my application (or any that looked good).

This is my take on the B&W Drop hitches. I designed this to use with the stock TRX4 hitch receiver - though this should work with most other rc bumpers that have a receiver for the hitch.

I didn't design a ball for it because I wanted to use a metal one (which is just turn buckle joint).

This is my first attempt at designing anything, if you have any questions or feedback - please let me know!

Print Settings

Printer brand:
Sovol 3D
Printer:
Sovol SV01PRO
Rafts:
No
Supports:
Doesn't Matter
Resolution:
.15
Infill:
100%
Filament brand:
Generic
Filament color:
Grey
Filament material:
PLA+
Notes:
You may need to file down the part that goes into the bumper just a bit - it's a pretty tight fit. I Just took a lighter and warmer up the area a bit and then pressed it into the bumper just fine. You'll want to make sure you. have a screw to secure it to the bumper.

Post-Printing

B&W 1/10 RC爬行车专用挂钩配件

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

最新模型