磁吸式PosiTector DFT测量仪

Magnetic Holder for PosiTector DFT Gage

2024-03-18 07:53:25

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Made this for the connector on the back of my PosiTector DFT gage case so I can hang my gage while taking readings. The "nub" on the back will slot into the grove on the top face. The bottom face has a slot for a 60x10x3 mm magnet (I bought these off Amazon, they are DIYMAG Strong Neodymium bar Magnets with Double-Sided Adhesive). I used a bit of silicone adhesive for a stronger bond.

I have yet to test in the field, but my preliminary testing seems to be working just fine for my use case. I may make a REV2 with 2 magnets for thin gauge steels for a better hold.

This was done for fun and for my personal use, thought others that may have a similar dimension "nub" (nominally 6.5-mm shaft, 9.5-mm head, shaft is 4.1-mm long and head is 3.6-mm tall) could use this where the need to hang something with a magnet. Enjoy!

Print Settings

Printer brand:
Bambulabs
Printer:
Bambu P1S
Rafts:
No
Supports:
No
Resolution:
0.42
Infill:
15%
Filament brand:
Generic
Filament color:
Black
Filament material:
PLA
Notes:
Basically using the default settings. Also, I printed without supports with the magnet opening facing down and had no issues, your mileage may vary.