FLSUN V400 打印机顶部磁吸固定座
FLSUN V400 printer top magnetic mount
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I did not like the way my brand new FLSUN V400 had the tablet mounted on the bottom of the printer. I decided for me it would be best mounted on the top. I pulled the wire loom back, separated the wires for the tablet then returned the other wires to the original location.
I then got to work on a magnetic mount to keep the tablet secure on the top of the 3D printer.
I used PLA Plus to print it and used 15 - 10mm X 2mm magnets to hold it firmly in place. I left a little wiggle room for different printers and used CA glue with activator to hold them in place. Make sure to get the magnets in the same polarity before gluing them in place.
This holds well to the top but is easy to move it around for the best viewing angle.
Print Settings
- Printer brand:
Flsun
- Printer:
Flsun V400
- Rafts:No
- Supports:No
- Filament brand:
JAYO
- Filament color:
Black
- Filament material:
PLA +
- Notes:
I just bought this printer but after a few prints with PLA + I have the bed set to 70C and the print head to 210C.
相关内容
联系我们
最新模型
-
适用于任何步进电机的弹簧联轴器2024-05-08 -
本田Civic 5D暖气阀门控制装置2024-05-08 -
尼基塔钥匙扣模型2024-05-06 -
福克斯尘埃清扫密封压紧装置，36毫米直径2024-05-06 -
6X9英寸音箱间隔件2024-05-06
最热下载
-
精灵族森林守护者A2023-03-26 -
参数化的两部分模具生成器（用于OpenSCAD）2023-03-26 -
ZTE MU5001 上位电容器2024-01-10 -
红米手表4号充电基座2024-03-15 -
旅行游戏盒2024-05-08