FLSUN超级跑车床夹紧装置
FLSUN superracer bed hold clamps
2023-08-20 18:42:27
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
these are clamps to hold the bed on FLSUN super racer, im sure they may work for other FLSUN printers, you may need to remix.
How I Designed This
Taken from original
Designed this in Solidworks to replace the missing ones on a second super racer i purchased. measured and tested and work well. I printed with 4 walls and 60% infil, for added strength in PLA but could be made in ASA, ABS or PETG if necessary.
Bed temps of 60 degrees will be fine for these, if you are running hotter bed temps for other filaments, then id suggest using ASA or PETG over PLA.
Tags
License
CC BY
FLSUN superracer bed hold clamps
by TiberVannin is licensed under the Creative Commons - Attribution license.
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
联系我们
邮箱: 289047960@qq.com
最新模型
-
摩洛哥过山车模型套装2024-05-06 -
博世20伏特电池固定架2024-05-06 -
塞勒斯尼亚锁扣2024-05-06 -
兔子和敞篷汽车螺丝夹具2024-05-06 -
Arma Grom舵机/ESC安装架2024-05-06
最热下载
-
Arduino或5V继电器控制板固定架2024-04-02 -
Woods Mower 30922 护盾保持者2024-04-24 -
幻想磁力2024-05-03 -
花环戒指2024-05-08
