二战波音B-17垂直稳定器书签

WWII B-17 Vertical Stabilizer Bookmark

2024-03-18 07:53:25

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

二战波音B-17垂直稳定器书签

二战波音B-17垂直稳定器书签

Summary

B-17 tail fin bookmark I made for my WWII books. I'm hoping my model encourages people to read :)

Print Settings

Printer brand:
Creality
Printer:
Ender-3 v2
Rafts:
No
Supports:
No
Resolution:
.2, .12
Infill:
100
Filament brand:
Inland
Filament material:
PLA
Notes:
IMPORTANT; I suggest using a .2 mm nozzle and .12 mm layer height for the "Group Letter" and "Letters" because they are very small.

For the "Group Letter" file, you just need to do a filament change (see how to here; https://www.youtube.com/watch?v=1nBnVtOEAiY&t=3s )

For the "Letters" file, I suggest printing them with a -.1 mm horizontal expansion so they fit properly

The bookmark itself can be printed with a regular .4 mm nozzle and .2 mm layer height. I do recommend setting your wall line count to 1, it makes the area around the letter holes look better

Other than that, I suggest making sure your printer is really dialed

Tags

Air Force army B17 bomber book bookmark military WWII

License

CC BY-NC-SA

WWII B-17 Vertical Stabilizer Bookmark
by grant1943 is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.

二战波音B-17垂直稳定器书签

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

CHIMERA/RHINO 3D模型代理模块APC（FDM友好，一层打印完成）
2024-04-07
无图标 H1 - Heltec V3 外壳
2024-04-15
刀之站立
2024-04-16
乒乓球无气
2024-04-22
ZigBee接触门传感器 TS0203 _TZ3000_oxslv1c9 增高器
2024-04-30

最热下载

最新模型