O环面型密封盖和插头

O Ring Face Seal Caps and Plugs

2024-03-18 08:50:13

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I designed a bunch of ORFS (O Ring Face Seal) Caps and plugs, from size Dash 4 to Dash 20. I work on heavy equipment and sometimes you either let someone borrow a cap or plug and it's now lost or you just don't have enough. These caps and plugs are lightweight and very cheap to make. If you lose one, you can easily print a few more. Most of the time, you only need to cap off a hose or a fitting on a hydraulic system to keep dirt out and to stop spillage. These caps and plugs WILL NOT hold pressure. DO NOT run a piece of equipment or energize a hydraulic circuit with these caps and plugs installed. These are to be used HAND TIGHT, no tooling required, which is why the knobs do not have wrench flats on them. Enjoy!
(Sizes, Dash 4,6,8,10,12,16,20)

-Dan

Print Settings

Printer brand:
ELEGOO
Printer:
ELEGOO NEPTUNE 4 Pro
Supports:
No
Infill:
25%
Notes:
I printed the plugs upside down, (knob down, on the print bed, threads up) to avoid using supports.