3dsjs

56个高质量平面型箱号标识

56 QT plano tote nameplates

2024-04-13 09:00:03

使用说明

  1. 所有模型资源均由用户上传分享,内容来源于网络公开资源
  2. 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
  3. 模型将通过邮件发送(5分钟内自动发送),感谢理解带宽压力,超过1小时没收到,请联系我们
关于费用

我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!

扫码手机访问
抖音私信 @jobsfan

Summary

First ever 3D print design turned out decent.
nameplates fit in the indentations on the lid, various nameplates to easily identify what is in your totes. I included a blank one STL & BLEND file.
PLANO 56 QT sportsman trunk found them at Cabela's.
NOTE: slightly effects the stacking of totes i don't stack them but I'm sure you could go from 5mm to like 2-3mm and they would still stack normal.

https://www.cabelas.com/shop/en/plano-sportsmans-trunk-100168779?COBRANDED=RUMBOES_ADW&acntb=flight&cq_plac=&cq_net=o&cq_pos=&cq_med=&cq_plt=gp&msclkid=f9ae44e6329011b15b1f22fff7bfc05d&gclid=f9ae44e6329011b15b1f22fff7bfc05d&gclsrc=3p.ds

Print Settings

  • Printer brand:

    Creality

  • Printer:

    Ender-3 S1

  • Rafts:
    No
  • Supports:
    No
  • Resolution:
    .16
  • Infill:
    30
  • Filament brand:

    eSUN

  • Filament color:

    Q-olive green

  • Filament material:

    PLA+

  • Notes:

    played with ironing, fuzzy skin etc. turned out better without, then again i have no idea what I'm doing lol

    dimensions
    121.4mm x 49.7mm x 5mm

Post-Printing

556 nameplate shown was a test fuzzy skin/ironing
6.5 CREED nameplate is the settings listed

How I Designed This

Tags

License

CC BY-NC

56 QT plano tote nameplates
by lukeprint1 is licensed under the Creative Commons - Attribution - Non-Commercial license.

56个高质量平面型箱号标识
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15

相关内容

猜你喜欢