气动PC4-10支架（PTFE）

Pneumatic PC4-10 Mount (PTFE)

2024-03-18 10:31:04

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a 3D printable 12mm mount for a pneumatic PC4-10 connector. The mount secures to a thin panel's 12mm hole via a 3D printable nut. The PC4-10 can accept a 4mm PTFE tube.

The PC4-10 connector is a common pneumatic part and can be sourced from multiple sources.

These 3D printed nuts and bolts should only be finger tightened. Care! Over tightening of the nut will sheer the screw from its head.

Here is my 3D design. My design may match your needs, too.

My print is made in 1.75mm eSUN PLA+ Black filament, with 0.2mm layer height and 15% infill on a Bambu X1 Carbon printer. Optionally set Wall Loops = 4. No print supports, rafts nor brims required.

I hope that you can find this design useful, too.

Remember to leave me some feedback or even a tip to keep me enthused to make more of these drawings.

For more of my models, see my main uploads site at MakerWorld as “Wiseone” ...
https://makerworld.com/en/u/3687936443