模块化扳手/螺丝刀架

Modular Wrench/Screwdriver Holder

2024-03-19 12:11:41

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I trimmed down the top of the protruded locking end as I noticed it was causing a curving issue when pieces were put together. Also on the bottom of that same end I cut the angles at a 45 degree angle to absolutely remove any need for support as Cura called for support.