光剑定制手柄配件：适用于迪士尼/哈斯博罗Forge系列光剑

Lightsaber Custom Hilt Add-on for Disney/Hasbro Forge Lightsabers

2024-03-20 08:46:50

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Basically a custom accessory that attaches to the top of some Disney/Hasbro Forge lightsabers, such as this one: https://www.halloweencostumes.ca/star-wars-forge-luke-skywalker-electronic-toy-lightsaber.html?mpid=277037 and replaces the existing top hilt piece (Disney/Hasbro Forge lightsabers are modular). It doesn't have the screw mechanism, but it should still work by sliding it onto the lightsaber and clicking the spring-loaded button on the lightsaber into small hole on the custom part. I'd recommend setting it to at least 20% infill, otherwise the top part could break easily. Also, I'd highly encourage to set the support pattern to zig-zag on Ultimaker Cura (or the equivalent on another slicer), and set the support infill SEPARATE to the infill of the piece, such as 9% infill, that way they're really easy to remove and don't damage the connector hole on the model.

Post your makes and comment; and I'll try to address any issues without too much delay. Thanks!

Edit: It turns out that the corkscrew designs on the part cause a lot of issues when printing, so I've changed the design to be easier to print. This file is called "HiltMod_V2"

*Second Edit: It looks like for some printers, the part might come out just slightly to small to fit over the blade, so I've increased the size of it a little bit. I've also made the connector hole larger to prevent the spring-loaded button on the lightsaber from getting stuck. This file is called "HiltMod_V3"