可调节超级夹紧器

Adjustable Super Clamp

2023-03-26 20:41:31

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

This is an offshoot of my beefy 30mm glass clamp:
https://www.thingiverse.com/thing:3072415

I will be playing with the OpenSCAD file over here in an attempt to make it even more customizable!

I tried to break the red clamp by cranking it down to the kitchen counter as hard as I could and then pulling on the drawers it was blocking (see photos). It flexed a lot when being clamped and showed some stress on an inside corner but it seemed very strong and it didn't feel like it was going to give way. The clamp returned to it's normal shape and did not warp from being under that much pressure. I will try printing clamps with less thickness and run the same test to see how much difference it really makes.

The original inspiration for making these stronger clamps was the popular "G-Clamp fully printable" that was quite easy to make fail when cranked down - deformation and bolt breakage.

For extra strength in practical use, print the screw part with 100% infill since there are some weak points, like where the ball connects. Adding STL files to make that easy to do.

可调节超级夹紧器

朋友，你觉得上面这个模型，属于下面的哪个分类？