Dremel工作站使用技巧指南

Dremel Workstation guide pieces

2024-03-20 20:53:49

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

this uses the extra 4 turning knob screws, 2 square and 2 hex nuts that come with the workstation that im not sure what they were intended for so i decided to use them in the print. You need to add a pause in the print just before the layer that would cover the nuts so you can insert them.

the hex nut was a bit tight to put in but it does go with some force, perhaps i should have made it a bit bigger. anyways they design works perfectly now for holding items steady. you can print 2 versions of each nut and 4 tops and your good to go. the bottom pieces have a handle so you can slide it thru the gap and attach the top piece.