dremel动力水泵
dremel powered pump
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Summary
This is a functional micro centrifugal water pump that has been tested and works. It is not self priming but certainly can put water well once it gets going. The design is exceptionally compact only taking up about 2"x1"x1". This is designed to be used with 5/16 vinyl tubing and a dremel to drive the pump. I will include amazon links to the specific parts that it was designed for.
5/16 ID Vinyl Tubing (10ft): https://amzn.to/2DmmpEF
5/16 ID Vinyl Tubing (25/50ft): https://amzn.to/2zmOuI6
dremel powerd
I also cut out a rubber gasket to create a better seal to avoid the pump leaking.
M2 Metric Hardware is what was meant to be used.
Hardware: https://amzn.to/2xtGHGK
leave a like
print the impeller at 100 infill
the rest should be done at about 60
Tags
相关内容
联系我们
热门推荐
-
Rc帆船双桅船模型 Wave 58 'Sta Ana'2023-04-01 -
玻璃中的时钟2023-08-24 -
Bell 212 消防型号专用3D模型2024-03-23 -
拳击手套帽2024-05-01 -
SplitCut OpenSCAD图书馆2024-05-02
最热下载
-
Voith Schneider 螺旋桨 VSP2023-04-11 -
Makergear M3 M2喷嘴标签2024-03-27 -
Philips 马拉松 FC9225 轮子 飞利浦 Marathon FC9225 轮子2024-03-31 -
BlueSCSI v2 SPARCstation驱动器支架及密封环2024-04-14 -
Dyson V6系列3D模型适配器站2024-04-15
最新模型
-
骷髅鸭2025-05-16 -
劳拉的基础模型2024-05-08 -
FCX18 1/18比例 RC爬行器 & 无线电站2024-05-08 -
Grogu Baby Yoda 曲奇造型模具 + 附带曼多人形曲奇模具及配方！2024-05-08 -
芯片夹2024-05-08