Makita Trimmer 高方面比夹具

Makita Trimmer High Aspect Jig

2024-03-20 23:29:33

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a Jig for the Makita DRT50 Wood Trimmer which allows to trim wood with extreme angles. It requires the angular trimmer shoe (shown in the photos) that comes shipped with the Makita DRT50ZJX2 set for example. You can also buy the Makita angular shoe separately (Makita part no. 198987-9).

The stock Makita accessories would only allow to trim angles down to 45°. In the photos you see an example wood piece which I trimmed with an angle of only 18° (related to wood surface). The trimmed side of the wood piece was 54mm wide as a result. For this to achieve I had to buy an extra long trimmer head. To my surprise I found that the well known / established trimmer head brands only offer heads up to around 35mm length, so I bought a Chinese extra long trimmer head from Amazon instead (the yellow one you see on the photos). I can provide the Amazon link if anybody needs it.

Print Settings: transparent (or well, milky) PETG, default settings, no support enabled.

Assembly: remove the black metal bottom surface plate from the Makita angular shoe by removing the 4 black screws (and put the metal plate aside, you don't need it for this jig), then fix the printed jig plate with those 4 black screws to the angular shoe instead. Slide the jig plate into the jig guide and fix the slide to the guide by using (up to) four M5 wing screws and M5 nuts. In the photos I used 4 of them. But less will also do.

CAUTION / DANGER: it is very important to understand that you MUST NOT clamp the wood piece between the jig guide and trimmer head! Doing so would cause a kickback that would throw out the wood piece into the direction of the rotating trimmer head and severe injuries may result! Have a look at the graphical illustration how to use vs. NOT to use this jig!

DISCLAIMER: You are using this jig at your own risk! In no event will I (the author) be liable for any risk or damage that may arise out of use or inability to use this jig!