Hinge Pin Door Stop Bumpers

2024-03-21 03:29:30

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

These are replacement bumpers for hinge pin door stop; mine looks very similar to https://www.amazon.com/Ingersoll-Rand-SC70Z-Hinge-Door/dp/B00ENEG5SK.

There are two bumpers, which I have named "Fixed side" and "Screw side". The geometry of the bumpers are different, due to the shape of the connectors on the door stop. YMMV

Using TPU, it offers flexibility and durability. In order to fit the bumper onto the door stop (especially the screw side), you may want to heat the part (e.g., by submerging in very hot water for a few seconds). Be very careful not to burn yourself.

I have included STL, STEP, and DXF files. The side sketches (Sketch (Front) and Sketch (Right)) are profiles, which were used to sweep/rotate to form the basic shape of the bumpers. My OnShape document for these parts is https://cad.onshape.com/documents/48312906aaf8a720333cd52f/w/3fb48f3e06063418a2455873/e/015342c1fdf9592ceba44454