Nozzle Cleaner Sidewinder X2 喷嘴清洁装置

Nozzle Cleaner Sidewinder X2 if you have bed tension mod

2024-04-04 16:45:26

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

When you have belt tensioner mod you have smaller y axis like 307,5 and original fit only when without belt tensioner mod 313

What changed?:

Shorter by 6mm and now brush is almost near bed plate and its compatitible with bed ternsion mod.

Print with petg due high temp near bed!

MY GCODE:

G28 ; home all axes
G90
G1 X60 Y307 F4000 ; #change value 307 if diffrent maximum y bed
G1 Z1 F1000 ; #change if you have nozzle on diffrent high
G1 X10 F25000
G1 X60 F25000
G1 X10 F25000
G1 X60 F25000
G1 X10 F25000
G1 X60 F25000
G1 X10 F25000
G1 E-2 F1800
M420 S1
M117 Purge extruder
G92 E0 ; reset extruder
G1 Z1.0 F3000 ; move z up little to prevent scratching of surface
G1 X2 Y20 Z0.3 F5000.0 ; move to start-line position
G1 X2 Y200.0 Z0.3 F1500.0 E15 ; draw 1st line
G1 X2 Y200.0 Z0.4 F5000.0 ; move to side a little
G1 X2 Y20 Z0.4 F1500.0 E30 ; draw 2nd line
G92 E0 ; reset extruder
G1 Z1.0 F3000 ; move z up little to prevent scratching of surface