迷你模块化抽屉 v2

Mini Modular Drawers v2

2024-03-21 11:50:32

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

These storage drawers are remixed from yamaha26's remix. The drawers make for a great way to store electronic components, small fabrication parts, and various small items. The changes in this remix include locking detents on the frames that snap the units together making them hold together as one interlocked unit and stops them from sliding apart. The handles on the drawers have also been changed to a loop for easier grabbing. I've also made more variations of the units from 1x to 6x in width since it can be useful to have more storage options.

Print Settings

Printer brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.4
Infill:
15%
Filament brand:
Any
Filament material:
PETG
Notes:
Use a 0.4mm nozzle or smaller to get the right extrusion thickness. First layers' height was 0.2mm. The frames are setup to be printed standing on their backside while the drawers are setup to be printed flat (like you'd use a draw). Using clear filament for the drawers can let you see paper labels that are inside the drawer if you do not plan to put sticker labels on the outside.

You could use different filament material for your environment. I chose PETG since it is more resilient than PLA and my storage units may be hung later.