外星战士铠甲：统治之风

Alien Warrior Arm Armour (Dominion Style)

2024-03-21 11:50:32

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Segmented Alien Warrior Arm Armour for use at Orion Sphere LRP (http://www.orionspherelrp.co.uk). In the style of the Tulaki Dominion (Proud Warrior Space Lizards), but similar to Klingon armour and other sci-fi warrior aliens. Holds together using small M3 hex nuts and low-profile M3 machine screws. There are loops along some segments for a thin strap, such as 20mm double-sided hook-loop tape.

Orion Sphere LRP is a science fiction live roleplay game that run events in the UK. Players take on the role of starship crews, companies and research institutes, as one of a host of alien species and in one of four competing Factions.

Print with the front edge on the bed, and use a brim at least if you can. Nuts are placed into the hexagonal slots on the outside, and screws on the inside (get a low-profile machine screw so it doesn't scratch your arm). Designed for small M3 hex nuts and machine screws.

Sections are sized in sequential numbers (lower numbers are smaller). Size the narrow part of your arm (above the wrist or elbow) for the smallest piece, and size up from there. Sections are about 5.5cm in length, so print as many as you need to cover your lower/upper arm. I'd recommend you print at least 2 sections with loops for attachment (Loop and Straight sections)

Loop and Middle Sections are tapered outwards, and jump up two sizes each time. Straight sections only jump up 1 section each time. Choose the appropriate type for how your arm widens.

Please share any makes or painted versions you have, and feel free to remix your own versions. Also, let us know on Facebook at http://www.facebook.com/orionspherelrp