桌面模型：蘑菇系列C1（外星植物53号）
Tabletop plant: "Mushroom Set C1" (Alien Vegetation 53)
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is the third 3-piece-set of my strange mushroom series. It looks like the mushrooms have finally had enough of mushroom pickers and are starting to take countermeasures... I still managed to catch a few: This time, they are a little taller and like before there are three unique designs. :-)
There are two versions of these models:
One version with and one without a hole on the bottom. (Which makes painting a lot easier as you can have a plant on a stick!)
Like most of my other plants, these should print just fine without support.
--
If you print this one, feel free to post a make - I'd really like to see how it works out for you.
Want to know what's next? Follow me on Twitter. :-)
Print Settings
- Printer brand:
Anycubic
- Printer:
Kobra 2
- Rafts:No
- Supports:No
- Resolution:tested with 0.05mm
- Infill:10%
- Filament brand:
Jayo
- Filament color:
Silver-Grey
- Filament material:
PLA+
- Notes:
Prints fine without support.
Tags
猜你喜欢
联系我们
热门推荐
-
ST150轮子螺母更换2023-05-01 -
Wörthersee 11cm Tester2023-05-13 -
冲击RC微型顶点4英寸GoPro英雄支架2023-05-14 -
最终派系平躺标识牌支撑2024-03-17 -
古老的树木2024-03-25
最热下载
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
可定制像素珠子照片面板2023-03-26 -
Hein Gericke 摩托车骑行服 Hiprotec 系统用的按扣（替换件）2024-04-03 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21 -
厨房水槽滤网过滤器2025-06-05
最新模型
-
弹弓HGX-FRAME V1A2025-07-18 -
用于加长杆的戴森配件支架2025-07-17 -
高跟鞋鞋架2025-07-17 -
女式凉鞋2025-07-16 -
真实玩偶 / 镶有凸圆形玻璃参数的眼睛2025-07-15