3dsjs

日产Mazda太阳镜罩扬声器支架

Miata Sun Visor Tweeter Mount

2024-03-21 23:52:42

使用说明

  1. 所有模型资源均由用户上传分享,内容来源于网络公开资源
  2. 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
  3. 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用

我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!

扫码手机访问
抖音私信 @jobsfan

Summary

This design is a re-make of several of the existing tweeter mounts out there utilizing the sun visor mounts for the 90-97 NA Miata. I was unhappy with existing designs not fully covering the holes in the ceiling as well as not being parameterized for different tweeter sizes. I've uploaded both the STEP and the F3Z file so you can make modifications to fit your preferences.

This design was specifically made for a 97 Miata using JBL GTO609C components with a 32mm tweeter. JBL uses the same "I-Mount" tweeter bayonet/detent style locks as Infinity, so this should be applicable for a wide range of speakers! For whatever doesn't fit, there are plenty of parameters that can be altered to work with what you have.

NOTE: This print is directional (L and R sides) but can be flipped so the tweeter points downward as well as more towards the driver/passenger faces. When printing, be sure to mirror one of the prints along the X axis to give you a left-hand and right-hand mount. The thicker side of the plate goes towards the middle of the car.

Print Settings

  • Printer brand:

    Bambulabs

  • Printer:

    Bambu X1C

  • Rafts:
    No
  • Supports:
    Doesn't Matter
  • Resolution:
    0.2mm / 0.16mm
  • Infill:
    15%
  • Filament brand:

    BambuLabs

  • Filament material:

    PETG Carbon Fiber

  • Notes:

    Supports can be used or not, depending on the quality you desire from the non-visible side. Both 0.2 and 0.16mm layer height looks great with the PETG-CF.

    NOTE: Using a material like ABS/ASA is probably recommended for people in warmer climates!

Tags

License

CC BY-NC-SA

Miata Sun Visor Tweeter Mount
by DeadTinker is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.

日产Mazda太阳镜罩扬声器支架
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15

相关内容

猜你喜欢