Wingspan Cave Card Sleeve Trim Guide

2024-03-22 05:18:26

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A small guide to use with scalpel blade (works fine with Stanley blades) to trim sleeves for Wyrmspan Cave Cards.

Use Sleeve Kings SKS-8808 sleeves, this will trim them down to ~ 59 mm x 57.5 mm.

You need to measure if your blade will fit 0.6mm groove.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 v2
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
gyroid
Filament brand:
N/A
Filament color:
black
Filament material:
PLA

How I Designed This

Inspired By

I'd meant to print out https://www.thingiverse.com/thing:4674521 ever since seeing it, but never got around to it. I was given the opportunity to sleeve Wyrmspan for a friend's birthday present and discovered that there aren't any currently available sleeves for the cave cards.

The cave cards are the same width as the dragon cards, where I'm using Sleeve Kings SKS-8808 sleeves, just square. I decided I'd just trim down the 8808 sleeves to suit the square cards so built a simple trim guide in TinkerCAD using the concept of the Everdell trim guide.

Wingspan Cave Card Sleeve Trim Guide

朋友，你觉得上面这个模型，属于下面的哪个分类？