墙插面板单插座

Wallplug Coverplate Single Gang

2024-03-22 06:14:42

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A Single-Gang standard electrical wall outlet cover plate. You can re-use the screw from the old one you intend to replace. This was designed for standard homes in Canada, I would imagine they would fit in US households and maybe Mexico if they use the same North American standard outlet.

Print face-up and use Ironing for best aesthetics. Use supports for the rear indentation, it should clear any screws/protrusions around the outlet.

I recommend PETG as the filament of choice, white ABS can be weak, although ABS and ASA have excellent electrical insulative properties. PLA works nicely too, but if you torque the screw a little too much and leave it, it will permanently deform leaving gaps at the top and bottom with the concave bow. PETG has good flexibility and will return to it's original form when pressure is relieved.