教师课桌抽屉挂饰

Teacher's desk drawer bearing

2024-03-23 01:55:01

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

 Skreeeeech!!! was the sound of metal on metal every time I opened the pen drawer on the old spacious Teacher's desk, I have for one of my Enclosed 3D printers. After removing the drawer. I discovered that the nylon rollers/bearings were gone on both sides of the center pen drawer. 
 So, Removed one two of the badly opening side drawers to see that those bearings were badly worn with flat surfaces on the once round riding surface (old bearings are pictured along with a retainer.  The retainer carries the bearing on a metal post on the drawer.  The bearing rides/wears on the retainer not the metal post.)
 This was my first "CAD" design,  well... EVER. so Tinkercad to the rescue.

I must admit I was pretty proud of myself. I not only saved a great project desk. but save my sanity by getting all the drawers rolling smoothly. Best of all no more nails on chalkboard SKREEEEch!
I used ABS because of my printers limitations and it what I had on hand. I believe Nylon to be the best or Delrin. But, ABS is what I had and I am a cheap bastard.