VKB 格拉迪安特 NXT 8040 配置档支架

VKB Gladiator NXT 8040 Profile mount

2024-03-23 09:00:22

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a simple mount for the Gladiator NXT to attach it to 8040 profiles as used in Simrigs or table mounts. It substitutes the original baseplate. If used in connection with my side covers this can reduce the width of the base to make it more suitable for a center mount.

I recommend using the following hardware:

4x M3x10 socket head screws

4x M6x12 socket head screws

4x M6 T-slot nuts

Print Settings

Printer brand:
Creality
Printer:
CR10S PRO
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
30%
Filament brand:
Polymaker
Filament color:
Black
Filament material:
PolyTerra PLA+
Notes:
I recommend printing it lying flat on the bed with support only for the part meant to fit into the slot in the extrusion.