鸡蛋尺寸测量仪

Chicken Egg Scale

2024-03-23 12:49:14

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

To make this egg scale work you have to use washers as counter weights on the back arm and the bottom of the front arm. There are screw holes for both locations. There are 16 washers on the back arm and two smaller washers on the front arm. Hopefully you can see from the pics. It might take some fiddling around to get it right.

You'll need some superglue to glue the base together, and glue the body to the base with the support brackets. Ensure the holes for the M3 bolts are large enough to give a free smooth pivot.

Also, I had to reduce size to 75% in Cura to get this to print on my print bed. That's the right size anyways. I designed it a little too big, but reducing by 25% it turns out perfect.

No supports are needed when printing if you place the parts just right.

鸡蛋尺寸测量仪

朋友，你觉得上面这个模型，属于下面的哪个分类？