Lezyne GPS支架安装位置
Lezyne GPS stem mount
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Extensive customization of a Leyzne GPS stem mount (using Sketchup). Revisions include change from o-ring attachment to 3mm zip tie. Also some fine tuning of the pressure plate, addition of some small structural fillets, adjustment to mounting saddle (designed to fit 1mm of rubber between mount and stem).
Update: V2 file tightens some of the vertical tolerance between the bottom bridge and the retention 'ears' to provide a slighter tighter fit.
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3
- Rafts:No
- Supports:Yes
- Resolution:.16
- Infill:50
- Filament brand:
Ender
- Filament color:
Block
- Filament material:
PLA
- Notes:
Printed in PLA at 210, overhangs at 60d, support at 15%. This would probably be stronger in PETG or ABS, but so far the mount has functioned well for me.
Tags
License
Lezyne GPS stem mount
by dougvdh is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
相关内容
联系我们
热门推荐
-
星球大战TIE拱机3D模型 - 切割后打印无支撑结构且带有立架2023-03-26 -
地球巨人（加入我们的 Patreon）2023-03-26 -
Arduino学习工作站2023-03-26 -
丁丁火箭3D模型2023-03-27 -
我对Ring的爱2024-05-05
最热下载
-
开源 1:10 四驱竞技型 RC 车2025-07-08 -
红米手表4号充电基座2024-03-15 -
克利普施 Promedia 2.1音量Pod模拟机器架（铝制支架）安装基座2024-04-29 -
F1赛船3D模型固定文件2024-05-08 -
艺术雕像（女性）2025-07-16
最新模型
-
丰田22RE发动机Starer电机2025-08-08 -
适用于Raspberry Pi5的多功能适配器外壳2025-07-27 -
女巫女性2024-05-08 -
Sunlu FilaDryer S1 Plus气压计安装支架2024-05-08 -
Base Jigkick v2 for psp Baryon Sweeper2024-05-06