拉森加·纳美图 3D模型

Rasengan naruto

2024-03-24 02:11:28

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

To assemble the device, follow the steps below:

Screw the DC male jack into the small gear, then connect it to the arm. Solder wires to the arm, making sure they are long enough to come out of the other side of the device. Pass the ball bearing before connecting the small gear and arm.
Use super glue to stick the yellow motor to the chassis. Then screw in the jack holder and insert the big gear into the motor shaft.
Insert the female DC jack into the jack holder and solder the wires to the yellow motor pins.
Connect the male/female jack and gears. Cut three pieces of wooden skewer sticks and attach them according to the given image.
solder the 4 led in parralel and connect them them to the coin cell holderTo assemble the device, please follow the steps listed below:
First, screw the DC male jack into the small gear and connect it to the arm. Solder wires to the arm ensuring that they are long enough to come out of the other side of the device. Before connecting the small gear and arm, pass the ball bearing.
Next, use super glue to stick the yellow motor to the chassis. Then, screw in the jack holder and insert the big gear into the motor shaft.
Now, insert the female DC jack into the jack holder and solder the wires to the yellow motor pins.
Connect the male/female jack and gears. Cut three pieces of wooden skewer sticks and attach them as shown in the image provided.
Finally, solder the 4 LEDs in parallel and connect them to the coin cell holder.

this design is not perfect try to optimise and improve it thankyouTo assemble the device, please follow the steps listed below:

First, screw the DC male jack into the small gear and connect it to the arm. Solder wires to the arm, ensuring that they are long enough to come out of the other side of the device. Before connecting the small gear and arm, pass the ball bearing.
Next, use super glue to attach the yellow motor to the chassis. Then, screw in the jack holder and insert the big gear into the motor shaft.
Now, insert the female DC jack into the jack holder and solder the wires to the yellow motor pins.
Connect the male/female jack and gears. Cut three pieces of wooden skewer sticks and attach them as shown in the image provided.
Finally, solder the 4 LEDs in parallel and connect them to the coin cell holder.

Please note that this design is not perfect and can be optimized and improved. Thank you.

Print Settings

Printer brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
100%
Filament brand:
NA
Filament color:
copper
Filament material:
PLA

Post-Printing

the real work is after the print

material required:
1)5v charging module
2)toggle switch
3)yellow motor L-shaped
4)4*blue led
5)18650 lithium battery
6)CR2030 cell holder & cell
7)wires
8)DC male and female jack
9)ball bearing(22mm outer radius,8mm inner)
10)wooden skewer stick
11)velcro strap
12)mini gear motor without gears

How I Designed This

naruto

"I saw a video on Allenpan's YouTube channel and I wanted to improve the design while lowering the cost. So, I came up with my own version. Although there are a few flaws, it works effectively. The best part is that it only requires one battery to power the motors instead of two."