额外角落拨动小键

ZSA Voyager additional corner thumb key

2024-03-24 08:21:21

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Original post: https://www.printables.com/model/597881-additional-thumb-keys-for-zsa-voyager-keyboard

These keycaps are meant to fit the ZSA Voyager keyboard to allow for more thumb keys.

The default configuration for the Voyager keyboard only has 2 thumb keys on each side. I found that too limiting, so by eliminating the number row, all the alpha keys can be shifted one layer up, leaving the bottom-most layer available to be used as thumb keys (the CVBNM, keys on the default layout). However, the innermost keys of that layer and the small thumb-cluster keys interfere with each other.

By using these custom keycaps, you can now press those keys with the thumb without interfering with the neighboring keys and allows for full set of 5 thumb keys on each side of the keyboard.

I printed vertically for better quality, with 0.10mm layer height, in galaxy black prusament PLA. Worked great. The vertical printing with low layer height gave a nice texture to the key surface. The part that had the supports needed a little cleaning, but it's the least visible part of the key once mounted, so it works great.