可叠放的轨道型砂纸容器
Stackable Orbital Sandpaper Holders
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
These are stackable orbital sandpaper holders. They hold a large amount of pads as I have a lot.
I have included blank versions without numbers if you want to just use stickers for them.
Supports are only needed for the opening on the bottom of the containers the top technically needs supports but it prints fine without just a few loose strands that make no real difference to the model's usability.
These are designed to be Glued together
Colours can be used but they add 2 hours to the print so you can print in one colour and just paint in the numbers but the potion is there.
To change the colours just select the model in Bambu Studio and press “N” then use the bucket fill to flood fill the numbers I have them set to colours 1 and 2 on the AMS.
Print Settings
- Rafts:No
- Supports:Yes
- Resolution:0.2
- Infill:5
- Filament brand:
any
- Filament color:
any
- Filament material:
PLA
- Notes:
Supports are needed for the bottom connection point. top end prints fine without with a few loose stands not worth supporting and making the print longer
Tags
相关内容
联系我们
热门推荐
-
压缩袋真空适配器2023-03-27 -
Dew Shield for Evoguide 50ED2023-08-07 -
PGO BR200 验车速度传感器盒2023-08-09 -
自行车钥匙扣2024-01-05 -
Smallrig F40 跟踪焦点齿轮2024-04-23
最热下载
-
Fifine AM8冲击挂钩2024-03-26 -
硫化机模型2024-04-13 -
Ikea 米兹顿 插嵌2024-04-20 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21
最新模型
-
Flick 19E（增强型） - 可使用的玩具枪 - 类似弹弓的橡皮筋枪2025-08-21 -
罗技K400键盘壁挂式支架2025-07-27 -
一体打印活动关节熊猫和支架2025-07-25 -
用于加长杆的戴森配件支架2025-07-17 -
泡泡底拖鞋2025-07-17