磁吸纸巾架 V1 / 厨房 / 家居装饰 / 家庭生活
Magnetic Paper Towel Holder v1 / Kitchen / Home Decor / Home Living
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Magnetic Toilet Paper Holder v1
It holds the paper with magnetic locking. You can easily change the paper with one hand. The spindle runs up and down in both directions.
The shaft is magnetically connected to the body on the right side. You can bend it up and down by applying a little force. Replace the paper and return it to its original position.
It is possible to use more 18x2 magnets, I recommend using at least 3 to hold the spindle and paper weight.
I designed the magnet slots to compress the magnet with force. This may differ from another 3D printer due to calibration differences. It may be narrow or slightly wide.
You can use support. It took 5.5 hours to print with the Creality K1 Max.
You need some magnets, bolts and nuts
3x 18x2mm round magnets
1x m3x15mm bolt
1x m3 nut
(Attach the magnets so that they attract each other.)
You can screw it to the wall or stick it with double-sided tape.
Tags
License
Magnetic Paper Towel Holder v1 / Kitchen / Home Decor / Home Living
by icimdengelen is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
相关内容
猜你喜欢
联系我们
最新模型
-
第二屏幕2024-05-08 -
触摸屏支架2024-05-08 -
叉子与托盘 - 专为Bruda玩具设计2024-05-06 -
小型储罐支架2024-05-06 -
用于独木舟及其他栏杆的栏杆杯托2024-05-06
