参数化组合瞄准器/激光定位器

Parametric Combo Scope/Laser Mount for Marlin Rifles

2024-03-24 20:30:53

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I had a shitty bent rimfire scope and a shitty ebay laser sight, so I made a shitty plastic mount so I could put both of them in one place! It sucks a lot less when you think about how pointlessly expensive accessories like this are. Why would I even put a rimfire scope on a 44 magnum rifle? Because I had it, and because I can.

The design is symmetrical, so you can flip it around and have the laser on either side. If you don't want the laser, you can just omit it with a flag in the SCAD file.

This is designed to fit a 4-hole mount on Marlin leverguns (e.g. 1894/1895 pattern). This was made to fit the bolt pattern on my rifle. It's up to you to make sure the pattern matches yours. Is this the same style mount as is on your Marlin 22LR rifle? I don't know. Measure it and enter the new numbers as needed.

Despite what all the wizened forum-dwellers preach as they stroke each other's beards, there isn't a single holy unified standard rimfire scope dovetail. You have to try to measure it yourself. How do you correctly measure a dovetail with rounded edges and no good datum line? I don't know. Try. Read the SCAD file, enter your best guess, print the special test part and see if it fits.

Same goes for the shitty laser. Measure it.

To summarize, it is up to you to:

Verify the hole pattern
Verify the counterbore depth is appropriate for your screw length
Verify the dovetail size
Verify the laser size (if used)

The receiver screws should be #8-40 fillister head. If I recall, the counterbores are sized for a 5/16" long screw, but you should verify that the depthing is appropriate for your screws. There are holes on the underside of the part where you can store the four receiver plug screws for safe keeping.

The clamp screws are all M3 cap screws.