旅行用克里布bage游戏套装

Travel Cribbage Set

2024-03-24 20:45:07

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a travel cribbage set inspired by an earlier concept developed by 3DGeneDesigns (thingiverse.com/3dgenedesigns). I ended up starting from scratch and redesigning the entire concept for a few reasons:

Printing the boards in only one piece led to weakness along the horizontal dimension - the boards were prone to snapping in half. By printing the hole sheets in a different orientation, the entire object is strengthened.
Also, by printing the holes horizontally, you can layer the print and use two colors easily, creating a nice look to the board.
I also redesigned the board pieces so they slid out and snapped into position. I thought that was an easier way to fold and unfold the board.
I also felt like the box could benefit from a snap fit, so I put a hinge and snap latch on the top.

To assemble the cribbage boards, print Board1 and BoardHoles1. Glue them together, matching up the holes. (I like Loctite SuperGlue Ultragel). Do the same with Board2 and BoardHoles23, Board3 and BoardHoles23, and Board4 and BoardHoles4.

Print the CoverTop and CoverBottom. Assemble them with an M3 nut and 25mm bolt.

The pegs can be stored in the Cover Top. I put the initials X and O on top for this, but I used my and my wife's initials on mine.