可定制的 soprano 尤克里里 2.0

Customizable Soprano Ukulele 2.0

2024-04-30 10:53:49

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a Soprano ukulele I designed to be easy to print and assemble. No glue required for easy repair. This is an upgraded version that uses a shorter 250mm steel rod. I adjusted the sound hole and bridge placement for a louder and less muddy sound.

I have two versions of each ukulele.
Reg for calibrated printers and tolerance is for uncalibrated printers .

I suggest you calibrate your printer before printing. Another thing you can do is print both nuts and insert the steel rod to see which version will work best for your printer.

I had to remove the uke body. I need to modify and repair that model before I can re-upload that one.

Parts list:

1 x Neck
1 x body
1 x nut
1 x bridge
1 x 6mm x 250mm steel rod
1 x M3 x 16mm screw bolt
1 x M4 x 16mm screw bolt
4 x M1.7*6 self tapping screws
1 set of ukulele tuning pegs with screws ( I recommend this: https://www.amazon.com/dp/B00EQ2ABD4 Not an affiliate link)

Instructions to create are found on V1