牙签发射器
Toothpick dispenser
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Dispenser for 80mm x 2mm toothpicks. The container offers space for up to 350 toothpicks. Single ejection mechanism.
Additional parts: spring 10mm x 4.5mm, paper clip
See the dispenser in action: https://youtu.be/vM8a74EjuLA
Post-Printing
(1) Insert box into base frame by bending the back bracket carefully.
(2) Insert spring into hole
(3) Insert ejector into guide groove
(4) Insert box into front brackets by bending the bracket carefully.
(5) Shorten the paper clip and bend it as shown in the picture. The distance between the holes in the ejector and the base frame should be approximately 10 mm.
(6) Insert seperator. The beveled edge must be at the bottom and point into the inside of the box.
(7) Don't forget the toothpicks :-)
Tags
License
Toothpick dispenser
by BR_Mechanix is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
联系我们
热门推荐
-
经典数字密码保险箱2023-03-26 -
Huion Kamvas 24 Plus 配件支架2023-04-04 -
GPD Win 2 高性能3D工作站2023-04-30 -
3D模型: Lula2024-04-07
最热下载
-
可定制像素珠子照片面板2023-03-26 -
智能骰子滚动器2024-01-06 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21 -
沙箱建筑模型2024-05-08
最新模型
-
丰田22RE发动机Starer电机2025-08-08 -
3d打印全向自行车（部分金属在文件里面包含CAD图纸）2025-07-25 -
弹弓HGX-FRAME V1A2025-07-18 -
裸女站立2025-07-16 -
巴黎卢浮宫的三圣母像2025-07-16