链条删除套件 K1 Max

Chain Delete kit K1 Max

2024-03-24 22:25:43

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I found a file on Makerworld for a chain delete, I remixed the part for the extruder because I didn't like how high it made my wires stick out straight up. I made a support to help the wires where the chain previously bolted down. Although it doesn’t work well because the wire sag and end up going underneath it. I ended up reusing the first part of the chain for supporting them. I also remixed the Bowden tube wire holder to hold both wires not just one. this is a pretty involved install, do this all at your own risk. I was already replacing my Hottend so I didn't mind going a step further to do all this.

this is the link for the original extruder part. https://makerworld.com/en/models/236002#profileId-252155

this is the link for the original Bowden tube holder. https://www.printables.com/model/660979-creality-k1-chain-delete