3dsjs

金属丝清洁装置 - 适用于K1系列、K1 MAX和K1C型号 - V2.0版

Filament Cleaner For K1 / K1 MAX / K1C - V2.0

2024-02-06 04:29:49

使用说明

  1. 所有模型资源均由用户上传分享,内容来源于网络公开资源
  2. 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
  3. 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用

我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!

扫码手机访问
抖音私信 @jobsfan

Summary

Filament cleaning for Creality K1 / K1 MAX / K1C.
This design is an improvement on the filament cleaning system for the K1 line, available at: https://www.thingiverse.com/thing:6467084
In this version, an exagonal design is used for the entire set.
The entry for incorporating Pneumatic Fitting M6 has been added. This allows you to incorporate a Bowden tube to correctly direct the filament.
The magnetic closure system has been retained to facilitate feeding and maintenance.

List of materials:

  • 4x 3mm x 1mm magnets
  • Sponge to fill the cleaning chamber
  • double-sided tape

The system must be attached to the back of the machine using double-sided tape. The input is fair and may require minor printing adjustments, especially if printing is to be done with PLA.

Print Settings

  • Printer brand:

    Creality

  • Printer:

    K1

  • Supports:
    Doesn't Matter
  • Resolution:
    0,15
  • Filament brand:

    3D Prime

  • Filament material:

    ABA

  • Notes:

    If there is an elephant's foot formation on the base of the model, it may be necessary to scrape it with a knife so that it fits correctly.

    I recommend working with inverted polarities on magnets so that the lid only closes in the correct direction.

License

CC BY-NC

Filament Cleaner For K1 / K1 MAX / K1C - V2.0
by leoterra is licensed under the Creative Commons - Attribution - Non-Commercial license.

金属丝清洁装置 - 适用于K1系列、K1 MAX和K1C型号 - V2.0版
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15

相关内容

猜你喜欢