金属丝滚筒套装

Filament Roller Kit

2024-03-15 23:12:07

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Yet another version of Filament Rollers to install on the top of your rig. I was tired of constantly changing out the colors that i use the most so I designed this to be able to fit up to 3 rollers on my Ender 3 V2 Neo. It uses t-nuts to keep it in place.

The fit on the arms and bases are vert tight by design, so you will need to gently tap (pound) them into the sockets. The bearings used are typical 608.

You can always use your favorite roller that works with a 608 bearing or you can use the one I created for this.

There are three (4) different base attachment options.

A single arm base with attachments on both sides
A single arm base with attachments on one side (Right/Left)
- This was so I could fit more bases onto the top rail over where the rail attaches to the vertical printer rails.
A double arm base with attachments on both sides.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 V2 Neo
Rafts:
No
Supports:
Yes
Resolution:
.2mm
Infill:
60%
Filament brand:
SUNLU
Filament color:
Black
Filament material:
PLA
Notes:
The arms were printed on the side with a very minimal support just for where the bearings will sit, otherwise no other supports were used.