可调节金属丝滚筒 3D模型

Filament Roller (adjustable)

2024-04-03 04:54:43

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

抖音私信 @jobsfan

Hello fellows,
This is my remix of:

My goal was to get rid of using screws and the usage of supports cause no one likes that ;)

I heavily redesigned the following:

bottom unit: no supports needed due to 45° dovetail-like guide
side panels: no screws needed anymore due to a press fitting between the 608 bearings

You will need to print "side_panel_V3.stl" 4 times.

The bottom unit is currently designed to fit a maximum spool thickness of 70cm.
Perhaps I will upload some files for bigger spool sizes later.

I've included two different bottom unit files:

"bottom_unit_V3.2_lose_fit.stl" -> side pieces can easily be moved back and forth (Recommend !)
"bottom_unit_V3_tight_fit.stl" -> you will need a lot of force to move anything

Additionally, you will need some generic 608 bearings.

If you have any further questions let me know it in the comments.

Happy printing!

Printer brand:
Creality
Printer:
Ender-3 v2
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
30
Filament brand:
GEEETECH
Filament color:
black
Filament material:
PLA
Notes:
minimum 30% infill recommend for the side panels, bottom unit can be printed with whatever infill density you like

Brim recommended (7 rows)